.

5pcs/lot 5V DC Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller Transmitter Used As Light Switch

5pcs/lot 5V DC Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller Transmitter Used As Light Switch

22.69
$ 19.97 -12 %

Amount
In stock

5pcs/lot 5 V DC  Remote Control Wireless Relay Receiver Board With 433mhz 4 Key RF controller Transmitter Used As Light Switch     Important Note : Non professionals please don't buy this receiver module, because we have no English instructions for the product. This receiver module can be learned by nearly all kinds of 433mhz learning remote transmitter. Packing List 5 X 4-Channel 433mhz RF wireless learning receiver 5 X 4 KEY remote transmitter(no battery)   Product Introduction : 1 Working voltage :  4.5-5.5 V DC 2 VCC : power supply positive, GND : power supply negative 3 Maximum Output Current : 10m A (each channel) 4 Static working current : 3m A(Relay is released) 5 Module Dimension : 20mm*30mm*6mm 6 Module Type : 433m Hz RF wireless receiver module 7 Receiver Distance : 15-100m 8 Working Mode : Self-locking/Jog/Interlock 9 Working Indication : LED D1 light ( learning and signals indicator light) 10 Outlet : OUT1-OUT4 are four different outlets   How to set learning module? 1 : Set 1st channel learning way : Supply power to the module, press the “learning key” one time, the LED D1 light will flash one time, it means the first channel of module enters the learning state. Then you can press the RF remote that you need to learn. When you see the LED D1 light flash two times, it means the learning successfully. 2 : Set 2nd channel learning way : Supply power to the module, press the “learning key” one time, the LED D1 light will flash two times, it means the second channel of module enters the learning state. Then you can press the RF remote that you need to learn. When you see the LED D1 light flash two times, it means the learning successfully. 3 : Set 3rd channel learning way : Supply power to the module, press the “learning key” one time, the LED D1 light will flash three times, it means the third channel of module enters the learning state. Then you can press the RF remote that you need to learn. When you see the LED D1 light flash two times, it means the learning successfully. 4 : Set 4th channel learning way : Supply power to the module, press the “learning key” one time, the LED D1 light will flash fourth times, it means the third channel of module enters the learning state. Then you can press the RF remote that you need to learn. When you see the LED D1 light flash two times, it means the learning successfully. 5 Cancel learning way : Keep pressing the “learning key”, then supply power to the module,  When you see the indicator light flash four times, it means you cancel the learning successfully.   How to change the working mode? 1 Interlock : Press the “learning key” then supply power to the module, after you see the indicator light flash one times, then do not press the “learning key” any more.

Product data

Item Type:
Switches
Remote Distance:
3-8 meters
Certification:
CCC
Brand Name:
XIND ELE
Features:
4 way
Switch Type:
Remote Control
Warranty:
3 month
Model Number:
433mhz